The RJ45 connector is an electronic component that is matched and connected with the appropriate components to realize the connection and disconnection of the circuit. In order to ensure the normal operation of the network connector, it is very important for the RJ45 network connector to perform a safety inspection within a certain period of use. The following are the things that should be considered during the inspection of the RJ45 network connector:

1. The inspection of the RJ45 connector must be carried out when the power switch is turned off, otherwise the related electrical components will be burned out due to the short circuit of the current.

2. When removing the network cable connector, carefully observe the connection method of the connector. First of all, the network connector can be disassembled only when the locking spring is released or the buckle is pressed. Do not force it. When assembling, the connector should be inserted in the opposite way and locked.

3. When the waterproof RJ45 connector is removed and tested, care should be taken to remove the sealing ring carefully to prevent the sealing ring from being damaged and affecting the waterproof effect; when assembling, the sealing ring must be installed in place. Otherwise, circuit failure may result from water entering the connector.

4. When checking the RJ45 connector with a multimeter, do not apply too much force to the metal terminal when the meter rod is inserted to prevent deformation and cause poor contact.